Makita 10pc 18v Power Tools Bundle

Makita 10pc 18V Power Tools Bundle

Maximum entries 70 per person

or take the £1000 Cash Alternative

Makita 10 Piece Kit 18V Li-ion with 3 x 5.0Ah Batteries Charger T4TKIT-309

Features:

Makita DTD152 Impact Driver:

Electric Brake
Variable speed control trigger
Forward/reverse rotation
Twin LED job light
High rotation speed
One-touch bit installation
Ergonomically designed soft grip handle
Compact overall length of 137mm
Lightweight design
Battery protection circuit
Belt clip

Makita DHP458 Combi Drill:

Enhanced dust and drip-proof performance for use in outdoor applications or harsh environments.
Single sleeve keyless chuck allows for easy bit installation/removal by one hand.
Twin LED Job light with pre-glow and afterglow functions.
Higher power and productivity.
Ergonomic design for fatigue free use.
21 Torque settings in clutch mode.

Makita DTW300 Impact Wrench:

Electric brake
Variable speed control by trigger
Forward / reverse rotation
LED job light
Brushless motor
Electronic 4 stage impact power selection
Trigger switch with full speed mode: Variable speed mode can be changed to full speed mode simply by pushing a button. Because in full speed mode the trigger travel is shorter , the full speed is reached faster.
Auto-stop system available both in forward/reverse rotation modes

Makita DGA452 Angle Grinder:

Electric brake
Variable speed control trigger
Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current
Forward and reverse trigger
LED job light
Ergonomic soft grip

Makita DKP180 Planer:

Planes a width of 82mm (3¼) in a single pass.
Fitted with a comfortable operator handle.
Easy to use adjustable depth settings.
A precision machined aluminum base allows for planing accuracy and the cutter head makes 14000 cuts per minute for fast stock removal.
The lock -on button gives the operator the option of continuous operation.
Left and right handed use due to the buttons on either side of the handle.
Dust extraction port on the side.
Adjustable up to a 2mm depth of cut.
Shoe on the underside stops accidental laying down of planer while blade is still moving.
Rebates to a maximum depth of 9mm.
22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium -ion batteries have greater life spans than their Ni -MH or Ni -Cad counterparts giving 430% greater run time.
Lithium -ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni -MH battery.

Makita DSS611 Circular Saw:

22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Lithium-ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Double safety trigger.
High comfort grips.
Removable dust nozzle.

Makita DHR202 Hammer Drill:

3-Mode Switch for rotation only, hammering with rotation, or hammering only
2x faster drilling with synchronized RPM and BPM for more efficient drilling
Built-in torque limiter clutch disengages if bit jams when hitting rebar
Chisel rotates 360° with 40 different positions to get the best working
Ergonomic shape fits like a glove with even pressure and easy control
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
Electric brake
Forward/reverse rotation
Job light
Rotary hammer action
Rotary only action
Variable speed trigger

Makita DTM51 Multi Tool:

Tool-less accessory clamp. Lever style lock system allows for quick installation and replacement of accessories.
Ergonomically best possible barrel grip, with a perfect circumference size and shape which fits the hand for extra comfortable handling.
Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has been used up (Battery protector will shut off the power).
Accessories can be installed at 30º increments, across 360º.
Variable speed control dial.
Soft start.
Anti-restart function.
High operating efficiency.

Makita DBO180 Sander:

Simple to operate electronic push button switch with 3-speed settings
Connectable to dust extractor
Compact design with short height and lower centre of gravity for better manoeuvrability

Makita DML815 Torch:

12 pivoting positions with 0 to 170º swivel range
4 LED bulb for maximum illumination
Lightweight and compact for work in tight spaces
Accessory strap enables tool suspension for hands-free work
54 hours of continuous run-time

Comes with:

3 x 5.0Ah BL1850 Batteries
1 x DC18RC Charger
1 x 22 Tool Bag
1 x 26 Tool Bag

Makita DTD152 Impact Driver:

Battery Type: Li-ion
Voltage: 18V
Driving Shank: 6.35mm (1/4 Hex)
Machine Screw: M4-M8
Standard Bolt: M5-M16
High Tensile Bolt: M5-M12
Coarse Thread: 22-125mm
Impacts per minute: 0-3500 ipm
No Load Speed: 0-2900 rpm
Max Tightening Torque: 165Nm
Sound Pressure: 93 dB(A)
Sound Power: 104 dB(A)
Sound K Factor: 3 dB(A)
Vibration: 10.5 m/s²
Vibration K Factor: 1.5 m/s²

Makita DHP458 Combi Drill:

Voltage – 18v
Max. in wood – 65mm
Max. in masonry – 16mm
Max. in steel – 13mm
Max Torque S/H – 58 / 91 Nm
Torque Settings – 21 + drill
Vibration: Drilling – 9.5 m/sec²
Vibration K factor – 1.5 m/sec²
Body Only Machine
Electric Brake
Variable Speed Control – Trigger
Blows per Minute – 0-30000/6000 bpm
No Load Speed – 0-2000/400 rpm

Makita DTW300 Impact Wrench:

Barcode: 0088381898003
Voltage: 18V
Driving Shank: ½” Square Drive
Standard Bolt: M10 – M20
High Strength Bolt: M10 – M16
Impact Power Selection: Max, Hi, Med, Soft
Impacts per Minute: 0 – 4,000/ 3,400/ 2,600/ 1,800 ipm
No Load Speed: 0 – 3,200/ 2,600/ 1,800/ 1,000 rpm
Max Fastening Torque: 330 Nm
Nut Busting Torque: 580Nm
Net Weight: 1.5 – 1.8kg
Vibration: 12.5m/s²
Vibration K Factor: 1.5m/s²
Sound Pressure Level: 97 dB(A)
Sound Power Level: 108 dB(A)
Sound K Factor: 3 dB(A)

Makita DGA452 Angle Grinder:

Barcode: 0088381660112
Grinding Wheel: 4-1/2 / 115mm
Max Wheel Diameter: 4-1/2 115mm
No Load RPM: 10,000
Watt Hours: 54.0
Overall Length: 12-1/2

Makita DKP180 Planer:

Planing Width: 82mm – 3¼
Planing Depth: 2mm
Max rebate depth: 9mm
Battery type: Li -ion
Charging Time: 22 min
No load speed: 14000rpm

Makita DSS611 Circular Saw:

Voltage – 18V
Depth of Cut @ 90° – 57mm
Blade Diameter – 165mm
Depth of Cut @ 45º – 40mm
Depth of Cut @ 50° – 36mm
Bore Diameter – 20mm
Noise sound pressure – 91 dB(A)
Noise sound power – 102 dB(A)
Noise K factor – 3 dB(A)
No Load Speed – 3700 rpm
Vibration K factor – 1.5 m/sec²
Vibration: Cutting Chipboard – 2.5 m/sec²

Makita DHR202 Hammer Drill:

Voltage: 18v
Shank Type: SDS+ Plus
Capacity in Concrete: 20mm
Capacity in Steel: 13mm
Capacity in Wood: 26mm
Impacts per Minute: 0-4,000 ipm
Impact Energy: 2.0 J
No Load Speed: 0-1,100 rpm
Overall Length: 358 mm
NOISE & VIBRATION:
Vibration: Drilling: 3 m/sec²
Vibration: Chiselling: 11 m/sec²
Vibration: Hammer Drilling: 145 m/sec²
Vibration K Factor: 15 m/sec²
Noise Sound Pressure: 87 dB(A)
Noise Sound Power: 98 dB(A)
Noise K Factor: 3 dB(A)

Makita DTM51 Multi Tool:

Barcode: 0088381667418
Battery Type – Lithium-ion
Voltage – 18V
Shank – OIS
Oscillation Angle – 3.2º
Oscillations per Minute – 6,000 – 20,000
Maximum Output – 390W
Vibration K factor – 1.5m/sec²
Vibration: Sanding – 3.0m/sec²
Vibration: Scraping – 5.5m/sec²
Vibration: Plunge Saw Blade – 7.0m/sec²
Vibration: Sentimental Saw Blade – 4.5m/sec²

Makita DBO180 Sander:

Barcode: 0088381658584
Voltage: 18V
Orbits per Minute: 7000/9500/11000 opm
Orbit Diameter: 2.8 mm
Battery Type: Lithium-ion
Sanding Stroke per Minute: 14000/19000/22000 spm
Speed Control: 3 stage push button
Charging Time: 22 min
Pad brake: Yes
Paper Fastening: Hook & Loop
Pad Size: 123 mm
Paper Size: 125 mm
Maximum Output: 190W

Makita DML815 Torch:

Part Number: DML815
Barcode: 0088381886970
Continuous Runtime: 6.0Ah – 54 hours
Battery: 18V LXT Lithium-ion
Lumens: 160
Luminous Flux: 160lm
Illuminance at 1m: 3,000lx
Overall Length: 272mm